CM-2 Monaset Tool and Cutter Grinder
Machine may be shown with optional accessories.
Victor CM-2 Monaset Tool & Cutter Grinder provides versatile capability for multiple grinding operations at a single chucking of the work piece.
FEATURES:
- Sharpens and reconditions cutters & tools with complex shapes
- Multiple grinding operations at a single chucking of the work piece. It saves setup time and assures excellent concentricity
- Versatility for generating straight or tapered, right or left-hand, infinitely variable leads from a simple built-in lead mechanism
- Turntable mounting of entire workhead slide assembly, adjustable through 210° in the horizontal plane
- Workhead that is adjustable on separate main slide with dual handwheel control
- Offset slide for workhead spindle permits centerline of spindle to be offset from center of turntable
- Micrometer stop dogs and graduated dials which greatly simplify accurate positioning of workhead main slide, wheelhead cross, and longitudinal slides
Features
- CM-2 sharpens and reconditions complex tool shapes and parts.
- Turntable and guide bar allows workpieces to grind from different directions.
- Turntable and workhead set can rotate horizontally at 210° angle.
The spiral mechanism generates diverse variable leads.
CM-2 Grinding Functions
Accessories
STANDARD ACCESSORIES:
- Leveling blocks
- Collets (inch): 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8 and 1-1/4
- Collet wrench
- Indexing plates (8, 10, 12 divisions)
- Spring-loaded index pawl for workhead indexing plate
- Diamond dressing tool
- Diamond dressing tool holder or tool support bracket
- Grinding wheels (WA) (including flat, bowl and dish types)
- Grinding wheel guards with extension bar
- Grinding wheel flanges: 2 standard and 1 extended flanges
- Wheel spanner
- Cutter holder center gauge
- Workhead gauge for zeroing
- Wrench set
- Toolbox and adjusting tools
- Oil bottle
Specifications
MACHINE | |||||||||
---|---|---|---|---|---|---|---|---|---|
Model: | CM-2 | ||||||||
Type: | Monaset Tool & Cutter Grinder | ||||||||
WORKHEAD CAPACITY | |||||||||
Max. swing over main slide diameter: | 12" | ||||||||
Max. collet work diameter: | 1.25" | ||||||||
Min. collet work diameter: | 0.20" | ||||||||
Max. spiral angle: | 60° | ||||||||
Distance between collet nut and tailstock center: | 5.31" | ||||||||
WHEELHEAD | |||||||||
Grinding wheel diameter: | 4" | ||||||||
WORKHEAD STROKE | |||||||||
Main slide travel: | 5.12" | ||||||||
Offset slide travel: | 3.94" | ||||||||
Front of center: | 1.97" | ||||||||
Rear of center: | 1.97" | ||||||||
WORKHEAD ANGLE ADJUSTMENT | |||||||||
Rotation of horizontal plane: | ±105° (210°) | ||||||||
Rotation of vertical plane: | ±40° (80°) | ||||||||
GRINDING WHEELHEAD STROKE | |||||||||
X axis - left-right slide travel: | 4.33" | ||||||||
Y axis - total front-to-rear slide stroke: | 6.69" | ||||||||
Z axis - total vertical slide stroke: | 9.45" | ||||||||
SPINDLE SPEED | |||||||||
Workhead speed: | 440 rpm | ||||||||
Grinding wheelhead speeds: | 4000, 6000, 8000 rpm | ||||||||
MOTOR | |||||||||
Workhead: | 1/4 HP | ||||||||
Wheelhead: | 1/2 HP | ||||||||
WEIGHT & DIMENSIONS | |||||||||
Floor space: | 60"x67"x62.12" | ||||||||
Shipping dimensions (LxWxH): | 60"x45"x65" | ||||||||
Gross weight: | 2,140 lb. |
* Design and specifications are subject to change without notice.
Machine may be shown with optional accessories